2016 Июнь | Записки системного администратора

Архивы за месяц Июнь, 2016

Мониторинг дисков LSI MegaRaid-контроллера средствами megacli

Июнь 13th, 2016

Evgeniy Kamenev

Установка Megacli на Debian

# nano /etc/apt/sources.list

1	# nano /etc/apt/sources.list

#Debian 9
deb http://hwraid.le-vert.net/debian stretch main

1 2	#Debian 9 deb http://hwraid.le-vert.net/debian stretch main

#Debian 8
# deb http://hwraid.le-vert.net/debian jessie main

1 2	#Debian 8 # deb http://hwraid.le-vert.net/debian jessie main

#Debian 7
# deb http://hwraid.le-vert.net/debian wheezy main

1 2	#Debian 7 # deb http://hwraid.le-vert.net/debian wheezy main

# wget -O - http://hwraid.le-vert.net/debian/hwraid.le-vert.net.gpg.key | apt-key add -

1	# wget -O - http://hwraid.le-vert.net/debian/hwraid.le-vert.net.gpg.key \| apt-key add -

Установка Megacli на Ubuntu16

# nano /etc/apt/sources.list

1	# nano /etc/apt/sources.list

# Ubuntu 16
deb http://hwraid.le-vert.net/ubuntu xenial main

1 2	# Ubuntu 16 deb http://hwraid.le-vert.net/ubuntu xenial main

# wget -O - http://hwraid.le-vert.net/ubuntu/hwraid.le-vert.net.gpg.key | apt-key add -

1	# wget -O - http://hwraid.le-vert.net/ubuntu/hwraid.le-vert.net.gpg.key \| apt-key add -

# apt-get update

1	# apt-get update

# apt-get install megacli

1	# apt-get install megacli

# which megacli

1	# which megacli

/usr/sbin/megacli

1	/usr/sbin/megacli

 # megacli -V

1	# megacli -V

MegaCLI SAS RAID Management Tool  Ver 8.07.14 Dec 16, 2013
    (c)Copyright 2013, LSI Corporation, All Rights Reserved.

1 2	MegaCLI SAS RAID Management Tool Ver 8.07.14 Dec 16, 2013 (c)Copyright 2013, LSI Corporation, All Rights Reserved.

Проверка наличия загруженного модуля в ядре

# lsmod  | grep -i mega

1	# lsmod \| grep -i mega

megaraid_sas          139264  3

1	megaraid_sas 139264 3

Проверка наличия установленной LSI MegaRAID карты на сервере

# lspci  -nn | grep -i lsi

1	# lspci -nn \| grep -i lsi

02:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] [1000:0079] (rev 05)

1	02:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] [1000:0079] (rev 05)

Получение модели контролера и версии прошивки

# megacli -AdpAllInfo -aAll | grep -E 'Product Name|Serial No|FW Package Build'

1	# megacli -AdpAllInfo -aAll \| grep -E 'Product Name\|Serial No\|FW Package Build'

Product Name    : LSI MegaRAID SAS 9260-4i
Serial No       : SV23301736
FW Package Build: 12.15.0-0205

Product Name : LSI MegaRAID SAS 9260-4i

Serial No : SV23301736

FW Package Build: 12.15.0-0205

Важные параметры для мониторинга

# megacli -LdPdInfo -aALL | grep -E "(Id|State |Bad Blocks|Firmware state|Error Count|Predictive Failure Count)"

1	# megacli -LdPdInfo -aALL \| grep -E "(Id\|State \|Bad Blocks\|Firmware state\|Error Count\|Predictive Failure Count)"

[…]

Опубликовано в рубрике Debian/Ubuntu, Monitoring

Метки: LSI MegaRaid, megacli, monitoring, RAID

Комментарии отключены

Мониторинг software RAID-массива mdadm в Zabbix

Июнь 1st, 2016

Evgeniy Kamenev

1.Настройка Zabbix-агента

# cat /proc/mdstat

1	# cat /proc/mdstat

Personalities : [raid1]
md3 : active raid1 sda4[0] sdb4[1]
      1839089920 blocks super 1.2 [2/2] [UU]

md2 : active raid1 sda3[0] sdb3[1]
      1073610560 blocks super 1.2 [2/2] [UU]

md1 : active raid1 sda2[0] sdb2[1]
      523968 blocks super 1.2 [2/2] [UU]

md0 : active raid1 sda1[0] sdb1[1]
      16768896 blocks super 1.2 [2/2] [UU]

Personalities : [raid1]

md3 : active raid1 sda4[0] sdb4[1]

1839089920 blocks super 1.2 [2/2] [UU]

md2 : active raid1 sda3[0] sdb3[1]

1073610560 blocks super 1.2 [2/2] [UU]

md1 : active raid1 sda2[0] sdb2[1]

523968 blocks super 1.2 [2/2] [UU]

md0 : active raid1 sda1[0] sdb1[1]

16768896 blocks super 1.2 [2/2] [UU]

# egrep -c "\[.*_.*\]" /proc/mdstat

1	# egrep -c "\[._.\]" /proc/mdstat

Если символа _ нет, то на выходе получаем значение 0. Если же это значение больше 0, то рейд считается поврежденным, zabbix отправляет уведомление. Отправлять полученные значения на сервер мониторинга будем с помощью UserParameter.

# nano /etc/zabbix/zabbix_agentd.d/userparameter_mdadm.conf

1	# nano /etc/zabbix/zabbix_agentd.d/userparameter_mdadm.conf

### Software RAID Monitoring
UserParameter=mdadm.status,egrep -c "\[.*_.*\]" /proc/mdstat

1 2	### Software RAID Monitoring UserParameter=mdadm.status,egrep -c "\[._.\]" /proc/mdstat

# service zabbix-agent restart

1	# service zabbix-agent restart

Проверка работу этого параметра локально с Zabbix-агента

#  zabbix_agentd -t mdadm.status

1	# zabbix_agentd -t mdadm.status

mdadm.status                                  [t|0]

1	mdadm.status [t\|0]

Или удаленно с Zabbix-сервера […]

Опубликовано в рубрике Centos, Debian/Ubuntu, Monitoring, Monitoring

Метки: mdadm, monitoring, RAID, zabbix

Комментарии отключены

Мониторинг параметров S.M.A.R.T. в Zabbix

Июнь 1st, 2016

Evgeniy Kamenev

1.Настройка скрипта на Zabbix-агенте Создание папки для скриптов:

# mkdir /etc/zabbix/scripts/

1	# mkdir /etc/zabbix/scripts/

# сhown root:zabbix -R /etc/zabbix/scripts/

1	# сhown root:zabbix -R /etc/zabbix/scripts/

# chmod 750 /etc/zabbix/scripts/

1	# chmod 750 /etc/zabbix/scripts/

Создание самого скрипта

# nano /etc/zabbix/scripts/smart-stats.sh

1	# nano /etc/zabbix/scripts/smart-stats.sh

#!/bin/bash
export LC_ALL=""
export LANG="en_US.UTF-8"
##### OPTIONS VERIFICATION #####
if [[ -z "$1" || -z "$2" || -z "$3" ]]; then
  ##### DISCOVERY #####
  DEVICES=`ls /dev | sed -e '/^\([hs]d[a-z]\)$/!d'`
  if [[ -n $DEVICES ]]; then
    JSON="{ \"data\":["
    SEP=""
    for DEV in $DEVICES; do
      JSON=$JSON"$SEP{\"{#HDNAME}\":\"$DEV\"}"
      SEP=", "
    done
    JSON=$JSON"]}"
    echo $JSON
  fi
  exit 0
fi
##### PARAMETERS #####
RESERVED="$1"
DISK="$2"
METRIC="$3"
SMARTCTL="sudo /usr/sbin/smartctl"
CACHE_TTL="55"
CACHE_FILE="/tmp/zabbix.smart.${DISK}.cache"
EXEC_TIMEOUT="1"
NOW_TIME=`date '+%s'`
##### RUN #####
if [ -s "${CACHE_FILE}" ]; then
  CACHE_TIME=`stat -c"%Y" "${CACHE_FILE}"`
else
  CACHE_TIME=0
fi
DELTA_TIME=$((${NOW_TIME} - ${CACHE_TIME}))
#
if [ ${DELTA_TIME} -lt ${EXEC_TIMEOUT} ]; then
  sleep $((${EXEC_TIMEOUT} - ${DELTA_TIME}))
elif [ ${DELTA_TIME} -gt ${CACHE_TTL} ]; then
  echo "" >> "${CACHE_FILE}" # !!!
  DATACACHE=`${SMARTCTL} -A /dev/${DISK}`
  echo "${DATACACHE}" > "${CACHE_FILE}" # !!!
  chmod 640 "${CACHE_FILE}"
fi
#
cat "${CACHE_FILE}" | grep -i "${METRIC}" | awk '{print $10}' | head -n1
exit 0

#!/bin/bash

export LC_ALL=""

export LANG="en_US.UTF-8"

##### OPTIONS VERIFICATION #####

if [[ -z "$1" || -z "$2" || -z "$3" ]]; then

##### DISCOVERY #####

DEVICES=`ls /dev | sed -e '/^$[hs]d[a-z]$$/!d'`

if [[ -n $DEVICES ]]; then

JSON="{ \"data\":["

SEP=""

for DEV in $DEVICES; do

JSON=$JSON"$SEP{\"{#HDNAME}\":\"$DEV\"}"

SEP=", "

done

JSON=$JSON"]}"

echo $JSON

exit 0

##### PARAMETERS #####

RESERVED="$1"

DISK="$2"

METRIC="$3"

SMARTCTL="sudo /usr/sbin/smartctl"

CACHE_TTL="55"

CACHE_FILE="/tmp/zabbix.smart.${DISK}.cache"

EXEC_TIMEOUT="1"

NOW_TIME=`date '+%s'`

##### RUN #####

if [ -s "${CACHE_FILE}" ]; then

CACHE_TIME=`stat -c"%Y" "${CACHE_FILE}"`

else

CACHE_TIME=0

DELTA_TIME=$((${NOW_TIME} - ${CACHE_TIME}))

if [ ${DELTA_TIME} -lt ${EXEC_TIMEOUT} ]; then

sleep $((${EXEC_TIMEOUT} - ${DELTA_TIME}))

elif [ ${DELTA_TIME} -gt ${CACHE_TTL} ]; then

echo "" >> "${CACHE_FILE}" # !!!

DATACACHE=`${SMARTCTL} -A /dev/${DISK}`

echo "${DATACACHE}" > "${CACHE_FILE}" # !!!

chmod 640 "${CACHE_FILE}"

cat "${CACHE_FILE}" | grep -i "${METRIC}" | awk '{print $10}' | head -n1

exit 0

Скрипт предусматривает кеш, что позволяет сократить количество реальных обращений к серверу. Время действия кеша в секундах должно устанавливается чуть меньше чем период опроса элементов(по умолчанию в скрипте используется кеширование на 55 секунд, а интервал обновления элементов настроен на 60 […]

Опубликовано в рубрике Centos, Debian/Ubuntu, Monitoring, Monitoring

Метки: monitoring, smart, zabbix

Комментарии отключены

Мониторинг LSI MegaRAID в Zabbix

Июнь 1st, 2016

Evgeniy Kamenev

1.Установка скрипта на Zabbix-агенте

# megacli -LDInfo -LAll -a0 –NoLog

1	# megacli -LDInfo -LAll -a0 –NoLog

Adapter 0 -- Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name                :
RAID Level          : Primary-1, Secondary-0, RAID Level Qualifier-0
Size                : 2.728 TB
Sector Size         : 512
Is VD emulated      : Yes
Mirror Data         : 2.728 TB
State               : Optimal
Strip Size          : 256 KB
Number Of Drives    : 2
Span Depth          : 1
Default Cache Policy: WriteBack, ReadAhead, Direct, Write Cache OK if Bad BBU
Current Cache Policy: WriteBack, ReadAhead, Direct, Write Cache OK if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy   : Disk's Default
Encryption Type     : None
Bad Blocks Exist: No
Is VD Cached: No

Exit Code: 0x00

Adapter 0 -- Virtual Drive Information:

Virtual Drive: 0 (Target Id: 0)

Name :

RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0

Size : 2.728 TB

Sector Size : 512

Is VD emulated : Yes

Mirror Data : 2.728 TB

State : Optimal

Strip Size : 256 KB

Number Of Drives : 2

Span Depth : 1

Default Cache Policy: WriteBack, ReadAhead, Direct, Write Cache OK if Bad BBU

Current Cache Policy: WriteBack, ReadAhead, Direct, Write Cache OK if Bad BBU

Default Access Policy: Read/Write

Current Access Policy: Read/Write

Disk Cache Policy : Disk's Default

Encryption Type : None

Bad Blocks Exist: No

Is VD Cached: No

Exit Code: 0x00

# megacli -PDlist -a0 -NoLog

1	# megacli -PDlist -a0 -NoLog

Adapter #0

Enclosure Device ID: 252
Slot Number: 0
Drive's position: DiskGroup: 0, Span: 0, Arm: 0
Enclosure position: N/A
Device Id: 3
WWN: 50014ee65b17627a
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA

Raw Size: 2.728 TB [0x15d50a3b0 Sectors]
Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors]
Coerced Size: 2.728 TB [0x15d400000 Sectors]
Sector Size:  0
Logical Sector Size:  0
Physical Sector Size:  0
Firmware state: Online, Spun Up
Commissioned Spare : No
Emergency Spare : No
Device Firmware Level: 1K03
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x4433221103000000
Connected Port Number: 1(path0)
Inquiry Data:      WD-WMC1F0E62TV5WDC WD3000FYYZ-01UL1B2                  01.01K03
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :41C (105.80 F)
PI Eligibility:  No
Drive is formatted for PI information:  No
PI: No PI
Drive's NCQ setting : N/A
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No

Enclosure Device ID: 252
Slot Number: 1
Drive's position: DiskGroup: 0, Span: 0, Arm: 1
Enclosure position: N/A
Device Id: 2
WWN: 5000c500521a8d55
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA

Raw Size: 2.728 TB [0x15d50a3b0 Sectors]
Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors]
Coerced Size: 2.728 TB [0x15d400000 Sectors]
Sector Size:  0
Logical Sector Size:  0
Physical Sector Size:  0
Firmware state: Online, Spun Up
Commissioned Spare : No
Emergency Spare : No
Device Firmware Level: CC4B
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x4433221102000000
Connected Port Number: 0(path0)
Inquiry Data:             S1F0YM5XST3000DM001-9YN166                      CC4B
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive:  Not Certified
Drive Temperature :39C (102.20 F)
PI Eligibility:  No
Drive is formatted for PI information:  No
PI: No PI
Drive's NCQ setting : N/A
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No

Adapter #0

Enclosure Device ID: 252

Slot Number: 0

Drive's position: DiskGroup: 0, Span: 0, Arm: 0

Enclosure position: N/A

Device Id: 3

WWN: 50014ee65b17627a

Sequence Number: 2

Media Error Count: 0

Other Error Count: 0

Predictive Failure Count: 0

Last Predictive Failure Event Seq Number: 0

PD Type: SATA

Raw Size: 2.728 TB [0x15d50a3b0 Sectors]

Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors]

Coerced Size: 2.728 TB [0x15d400000 Sectors]

Sector Size: 0

Logical Sector Size: 0

Physical Sector Size: 0

Firmware state: Online, Spun Up

Commissioned Spare : No

Emergency Spare : No

Device Firmware Level: 1K03

Shield Counter: 0

Successful diagnostics completion on : N/A

SAS Address(0): 0x4433221103000000

Connected Port Number: 1(path0)

Inquiry Data: WD-WMC1F0E62TV5WDC WD3000FYYZ-01UL1B2 01.01K03

FDE Capable: Not Capable

FDE Enable: Disable

Secured: Unsecured

Locked: Unlocked

Needs EKM Attention: No

Foreign State: None

Device Speed: 6.0Gb/s

Link Speed: 6.0Gb/s

Media Type: Hard Disk Device

Drive: Not Certified

Drive Temperature :41C (105.80 F)

PI Eligibility: No

Drive is formatted for PI information: No

PI: No PI

Drive's NCQ setting : N/A

Port-0 :

Port status: Active

Port's Linkspeed: 6.0Gb/s

Drive has flagged a S.M.A.R.T alert : No

Enclosure Device ID: 252

Slot Number: 1

Drive's position: DiskGroup: 0, Span: 0, Arm: 1

Enclosure position: N/A

Device Id: 2

WWN: 5000c500521a8d55

Sequence Number: 2

Media Error Count: 0

Other Error Count: 0

Predictive Failure Count: 0

Last Predictive Failure Event Seq Number: 0

PD Type: SATA

Raw Size: 2.728 TB [0x15d50a3b0 Sectors]

Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors]

Coerced Size: 2.728 TB [0x15d400000 Sectors]

Sector Size: 0

Logical Sector Size: 0

Physical Sector Size: 0

Firmware state: Online, Spun Up

Commissioned Spare : No

Emergency Spare : No

Device Firmware Level: CC4B

Shield Counter: 0

Successful diagnostics completion on : N/A

SAS Address(0): 0x4433221102000000

Connected Port Number: 0(path0)

Inquiry Data: S1F0YM5XST3000DM001-9YN166 CC4B

FDE Capable: Not Capable

FDE Enable: Disable

Secured: Unsecured

Locked: Unlocked

Needs EKM Attention: No

Foreign State: None

Device Speed: 6.0Gb/s

Link Speed: 6.0Gb/s

Media Type: Hard Disk Device

Drive: Not Certified

Drive Temperature :39C (102.20 F)

PI Eligibility: No

Drive is formatted for PI information: No

PI: No PI

Drive's NCQ setting : N/A

Port-0 :

Port status: Active

Port's Linkspeed: 6.0Gb/s

Drive has flagged a S.M.A.R.T alert : No

Узнаем расположение бинарника megacli

# which megacli

1	# which megacli

/usr/sbin/megacli

1	/usr/sbin/megacli

Если путь к бинарнику отличается,то изменяем его в скрипте и в файле /etc/sudoers

# nano /etc/zabbix/scripts/lsimegaraid.sh

1	# nano /etc/zabbix/scripts/lsimegaraid.sh

#!/bin/bash

export LC_ALL=""
export LANG="en_US.UTF-8"
#
MEGACLI="sudo /usr/sbin/megacli"
#
if [[ -n ${1} && -n ${2} && -z ${3} ]]; then
  ##### DISCOVERY #####
  TYPE="${2}"
  if [[ ${TYPE} == "virtdiskovery" ]]; then
    DRIVES=`${MEGACLI} -LDInfo -LAll -a0 -NoLog | awk '/Virtual Drive:/ {printf("VirtualDrive%d\n", $3)}'`
    if [[ -n ${DRIVES} ]]; then
      JSON="{ \"data\":["
      SEP=""
      for DRIVE in ${DRIVES}; do
        JSON=${JSON}"$SEP{\"{#VIRTNUM}\":\"${DRIVE}\"}"
        SEP=", "
      done
      JSON=${JSON}"]}"
      echo ${JSON}
    fi
  elif [[ ${TYPE} == "physdiskovery" ]]; then
    DRIVES=`${MEGACLI} -PDlist -a0 -NoLog | awk '/Slot Number:/ {printf("DriveSlot%d\n", $3)}'`
    if [[ -n ${DRIVES} ]]; then
      JSON="{ \"data\":["
      SEP=""
      for DRIVE in ${DRIVES}; do
        JSON=${JSON}"$SEP{\"{#PHYSNUM}\":\"${DRIVE}\"}"
        SEP=", "
      done
      JSON=${JSON}"]}"
      echo ${JSON}
    fi
  fi
  exit 0
elif [[ -n ${1} && -n ${2} && -n ${3} ]]; then
  ##### PARAMETERS #####
  ##### PARAMETERS #####
  HOST="${1}"
  DRIVE="${2}"
  METRIC="${3}"
  FILECACHE="/tmp/zabbix.lsimegaraid.cache"
  TTLCACHE="55"
  TIMENOW=`date '+%s'`
  ##### CACHE #####
  if [ -s "${FILECACHE}" ]; then
    TIMECACHE=`stat -c"%Y" "${FILECACHE}"`
  else
    TIMECACHE=0
  fi
  if [ "$((${TIMENOW} - ${TIMECACHE}))" -gt "${TTLCACHE}" ]; then
    echo "" >> ${FILECACHE} # !!!
    DATACACHE=`${MEGACLI} -PDlist -a0 -NoLog | awk -F':' '
        function ltrim(s) { sub(/^[ \t]+/, "", s); return s }
        function rtrim(s) { sub(/[ \t]+$/, "", s); return s }
        function trim(s)  { return rtrim(ltrim(s)); }
        /Slot Number/              {slotcounter+=1; slot[slotcounter]=trim($2)}
        /Inquiry Data/             {inquiry[slotcounter]=trim($2)}
        /Firmware state/           {state[slotcounter]=trim($2)}
        /Drive Temperature/        {temperature[slotcounter]=trim($2)}
        /S.M.A.R.T/                {smart[slotcounter]=trim($2)}
        /Media Error Count/        {mediaerror[slotcounter]=trim($2)}
        /Other Error Count/        {othererror[slotcounter]=trim($2)}
     /Predictive Failure Count/ {failurecount[slotcounter]=trim($2)}
        END {
          for (i=1; i<=slotcounter; i+=1) {
            printf ( "DriveSlot%d inquiry:%s\n",slot[i], inquiry[i]);
            printf ( "DriveSlot%d state:%s\n", slot[i], state[i]);
            printf ( "DriveSlot%d temperature:%d\n", slot[i], temperature[i]);
            printf ( "DriveSlot%d smart:%s\n", slot[i], smart[i]);
            printf ( "DriveSlot%d mediaerror:%d\n", slot[i], mediaerror[i]);
            printf ( "DriveSlot%d othererror:%d\n", slot[i], othererror[i]);
            printf ( "DriveSlot%d failurecount:%d\n", slot[i], failurecount[i]);
          }
        }';
        ${MEGACLI} -LDInfo -LAll -a0 -NoLog | awk -F':' '
        function ltrim(s) { sub(/^[ \t]+/, "", s); return s }
        function rtrim(s) { sub(/[ \t]+$/, "", s); return s }
        function trim(s)  { return rtrim(ltrim(s)); }
        /Virtual Drive:/ {drivecounter+=1; slot[drivecounter]=trim($2);}
        /State/          {state[drivecounter]=trim($2)}
        /Bad Blocks/     {badblock[drivecounter]=trim($2)}
        END {
          for (i=1; i<=drivecounter; i+=1) {
   printf ( "VirtualDrive%d state:%s\n", slot[i], state[i]);
            printf ( "VirtualDrive%d badblock:%s\n", slot[i], badblock[i]);
          }
        }'` || exit 1
    echo "${DATACACHE}" > ${FILECACHE} # !!!
  fi
  #
  cat "${FILECACHE}" | grep -i ${DRIVE} | awk -F':' "/${METRIC}/ {print \$2}" | head -n1
  exit 0
#
else
  exit 0
fi

#!/bin/bash

export LC_ALL=""

export LANG="en_US.UTF-8"

MEGACLI="sudo /usr/sbin/megacli"

if [[ -n ${1} && -n ${2} && -z ${3} ]]; then

##### DISCOVERY #####

TYPE="${2}"

if [[ ${TYPE} == "virtdiskovery" ]]; then

DRIVES=`${MEGACLI} -LDInfo -LAll -a0 -NoLog | awk '/Virtual Drive:/ {printf("VirtualDrive%d\n", $3)}'`

if [[ -n ${DRIVES} ]]; then

JSON="{ \"data\":["

SEP=""

for DRIVE in ${DRIVES}; do

JSON=${JSON}"$SEP{\"{#VIRTNUM}\":\"${DRIVE}\"}"

SEP=", "

done

JSON=${JSON}"]}"

echo ${JSON}

elif [[ ${TYPE} == "physdiskovery" ]]; then

DRIVES=`${MEGACLI} -PDlist -a0 -NoLog | awk '/Slot Number:/ {printf("DriveSlot%d\n", $3)}'`

if [[ -n ${DRIVES} ]]; then

JSON="{ \"data\":["

SEP=""

for DRIVE in ${DRIVES}; do

JSON=${JSON}"$SEP{\"{#PHYSNUM}\":\"${DRIVE}\"}"

SEP=", "

done

JSON=${JSON}"]}"

echo ${JSON}

exit 0

elif [[ -n ${1} && -n ${2} && -n ${3} ]]; then

##### PARAMETERS #####

HOST="${1}"

DRIVE="${2}"

METRIC="${3}"

FILECACHE="/tmp/zabbix.lsimegaraid.cache"

TTLCACHE="55"

TIMENOW=`date '+%s'`

##### CACHE #####

if [ -s "${FILECACHE}" ]; then

TIMECACHE=`stat -c"%Y" "${FILECACHE}"`

else

TIMECACHE=0

if [ "$((${TIMENOW} - ${TIMECACHE}))" -gt "${TTLCACHE}" ]; then

echo "" >> ${FILECACHE} # !!!

DATACACHE=`${MEGACLI} -PDlist -a0 -NoLog | awk -F':' '

function ltrim(s) { sub(/^[ \t]+/, "", s); return s }

function rtrim(s) { sub(/[ \t]+$/, "", s); return s }

function trim(s) { return rtrim(ltrim(s)); }

/Slot Number/ {slotcounter+=1; slot[slotcounter]=trim($2)}

/Inquiry Data/ {inquiry[slotcounter]=trim($2)}

/Firmware state/ {state[slotcounter]=trim($2)}

/Drive Temperature/ {temperature[slotcounter]=trim($2)}

/S.M.A.R.T/ {smart[slotcounter]=trim($2)}

/Media Error Count/ {mediaerror[slotcounter]=trim($2)}

/Other Error Count/ {othererror[slotcounter]=trim($2)}

/Predictive Failure Count/ {failurecount[slotcounter]=trim($2)}

END {

for (i=1; i<=slotcounter; i+=1) {

printf ( "DriveSlot%d inquiry:%s\n",slot[i], inquiry[i]);

printf ( "DriveSlot%d state:%s\n", slot[i], state[i]);

printf ( "DriveSlot%d temperature:%d\n", slot[i], temperature[i]);

printf ( "DriveSlot%d smart:%s\n", slot[i], smart[i]);

printf ( "DriveSlot%d mediaerror:%d\n", slot[i], mediaerror[i]);

printf ( "DriveSlot%d othererror:%d\n", slot[i], othererror[i]);

printf ( "DriveSlot%d failurecount:%d\n", slot[i], failurecount[i]);

}

}';

${MEGACLI} -LDInfo -LAll -a0 -NoLog | awk -F':' '

function ltrim(s) { sub(/^[ \t]+/, "", s); return s }

function rtrim(s) { sub(/[ \t]+$/, "", s); return s }

function trim(s) { return rtrim(ltrim(s)); }

/Virtual Drive:/ {drivecounter+=1; slot[drivecounter]=trim($2);}

/State/ {state[drivecounter]=trim($2)}

/Bad Blocks/ {badblock[drivecounter]=trim($2)}

END {

for (i=1; i<=drivecounter; i+=1) {

printf ( "VirtualDrive%d state:%s\n", slot[i], state[i]);

printf ( "VirtualDrive%d badblock:%s\n", slot[i], badblock[i]);

}

}'` || exit 1

echo "${DATACACHE}" > ${FILECACHE} # !!!

cat "${FILECACHE}" | grep -i ${DRIVE} | awk -F':' "/${METRIC}/ {print \$2}" | head -n1

exit 0

else

exit 0

Установка прав

# chown root:zabbix /etc/zabbix/scripts/lsimegaraid.sh

1	# chown root:zabbix /etc/zabbix/scripts/lsimegaraid.sh

# chmod 550 /etc/zabbix/scripts/lsimegaraid.sh

1	# chmod 550 /etc/zabbix/scripts/lsimegaraid.sh

2.Настройка прав пользователю zabbix в sudo

# visudo

# visudo

# zabbix ALL=(ALL) NOPASSWD: /usr/sbin/megacli -LDInfo -LAll -a0 -NoLog
# zabbix ALL=(ALL) NOPASSWD: /usr/sbin/megacli -PDlist -a0 –NoLog
zabbix ALL=(ALL) NOPASSWD: /usr/sbin/megacli

# zabbix ALL=(ALL) NOPASSWD: /usr/sbin/megacli -LDInfo -LAll -a0 -NoLog

# zabbix ALL=(ALL) NOPASSWD: /usr/sbin/megacli -PDlist -a0 –NoLog

zabbix ALL=(ALL) NOPASSWD: /usr/sbin/megacli

Проверка работы скрипта для пользователя Zabbix

# sudo -u zabbix /etc/zabbix/scripts/lsimegaraid.sh none virtdiskovery

1	# sudo -u zabbix /etc/zabbix/scripts/lsimegaraid.sh none virtdiskovery

# sudo -u zabbix /etc/zabbix/scripts/lsimegaraid.sh none physdiskovery

1	# sudo -u zabbix /etc/zabbix/scripts/lsimegaraid.sh none physdiskovery

# sudo -u zabbix /etc/zabbix/scripts/lsimegaraid.sh none VirtualDrive0 state

1	# sudo -u zabbix /etc/zabbix/scripts/lsimegaraid.sh none VirtualDrive0 state

3.Настройка Zabbix-агента

# nano /etc/zabbix/zabbix_agentd.d/userparameter_lsimegaraid.conf

1	# nano /etc/zabbix/zabbix_agentd.d/userparameter_lsimegaraid.conf

[…]

Опубликовано в рубрике Centos, Debian/Ubuntu, Monitoring, Monitoring

Метки: LSI MegaRaid, monitoring, zabbix

Комментарии отключены

Мониторинг Exim в Zabbix

Июнь 1st, 2016

Evgeniy Kamenev

1.Настройка скрипта для анализа Exim-логов на Zabbix-агенте

# nano /etc/zabbix/scripts/exim4.sh

1	# nano /etc/zabbix/scripts/exim4.sh

#!/bin/bash
# Egor Minko. Synchron LLC. May.2012

zexim4ver="ver 2.1"
rval=0

# MULTIPLE PARSERS PROTECTION
LOCK=/tmp/zexim4.pid
while [ -e "$LOCK" ]; do
PID="`cat $LOCK`"
while [ "`ps h -p $PID -o pid,comm|wc -l`" -gt 0 ]
do
sleep 0.$[ ( $RANDOM % 10 ) + 1 ]s
done
done
echo $$ > $LOCK
trap "rm -f $LOCK; exit" INT TERM EXIT


# USAGE
function usage()
{
echo "zexim version: $zexim4ver"
echo "usage:"
echo " $0 deliver -- Delivered Messages"
echo " $0 arrive -- Submited Pakets"
echo " $0 error -- Errors Total for Messages"
echo " $0 defer -- Error status: Defered Messages"
echo " $0 unroute -- Error status: Unroutable address"
echo " $0 local -- Local/Virtual delivery of Messages"
echo " $0 complete -- Finished Packets"
echo " $0 reject -- Rejects Total for Packets"
echo " $0 badrelay -- Reject status: Relay not permited"
echo " $0 Pqueue -- Queue size in Packets"
echo " $0 Mqueue -- Queue size in Messages"
echo " $0 frozen -- Frozen Packets"
echo ""
echo " Packet = letter with many recipients"
echo " Message = A single message for one recipient"
echo ""
}

# GLOBAL INSTRUCTIONS
CACHETTL="58" # sec
main_log=/var/log/exim_mainlog
tmp_log=/tmp/exim_log_pars.txt
stats=/tmp/stats.txt
exim=`which exim`
function create_data()
{
# CREATING STATS FILE
if [ ! -e "$stats" ] ; then touch $stats ; fi

# CREATING TMP FILE
# additional 'sub' in 'awk' used for cutting special chars that breaks next 'sed' parsing. For now: []()
position=`tail -1 $stats |awk '{print $1" "$2" "$3}'`
position_log=`tail -1 $main_log | awk '{sub(/\]/,""); sub(/\[/,""); sub(/\)/,""); sub(/\(/,""); print $1" "$2" "$3}'`

# BUILDING REPORT ONLY IF THERE IS DIFFERENCE BETWEEN LAST LINE IN LOG
if [ "$position" == "$position_log" ]
then
vars="0 0 0 0 0 0 0 0 0"
else
if ! grep -qc "" $stats || ! awk '{sub(/\]/,""); sub(/\[/,""); sub(/\)/,""); sub(/\(/,""); print}' $main_log|grep -qc "$position"
then
awk '{sub(/\]/,""); sub(/\[/,""); sub(/\)/,""); sub(/\(/,""); print}' $main_log $main_log > $tmp_log
else
awk '{sub(/\]/,""); sub(/\[/,""); sub(/\)/,""); sub(/\(/,""); print}' $main_log |sed 1,/"$position"/d | sed /"$position"/d > $tmp_log
fi
vars="`awk '\
BEGIN {deliver=0; arrive=0; error=0; local=0; complete=0; reject=0; badrelay=0; defer=0; unroute=0}\
/[-=]>/ { deliver++ }\
/<=/ {arrive++}\
/ \*\* / {error++}\
/[=][=]/ {defer++}\
/al_delivery/ {local++}\
/Completed/ {complete++}\
/rejected/ {reject++}\
/relay not permitted/ {badrelay++}\
/Unrouteable address/ {unroute++}\
END {print deliver" "arrive" "error" "defer" "local" "complete" "reject" "badrelay" "unroute}' $tmp_log`"
fi

queue_size="`$exim -bpc`"
recipients="`exipick -bpu |awk '$2==""{print $1}'|grep -vE "^$"|wc -l`"
frozen="`exiqgrep -zi|wc -l`"
echo $position_log $vars $queue_size $recipients $frozen >> $stats

}
function zabbix_answer()
{
case $CASE_VALUE in
'deliver')
tail -n1 "$stats"|awk '{print $4}'
rval=$?;;
'arrive')
tail -n1 "$stats"|awk '{print $5}'
rval=$?;;
'error')
tail -n1 "$stats"|awk '{print $6}'
rval=$?;;
'defer')
tail -n1 "$stats"|awk '{print $7}'
rval=$?;;
'local')
tail -n1 "$stats"|awk '{print $8}'
rval=$?;;
'complete')
tail -n1 "$stats"|awk '{print $9}'
rval=$?;;
'reject')
tail -n1 "$stats"|awk '{print $10}'
rval=$?;;
'badrelay')
tail -n1 "$stats"|awk '{print $11}'
rval=$?;;
'unroute')
tail -n1 "$stats"|awk '{print $12}'
rval=$?;;
'Pqueue')
tail -n1 "$stats"|awk '{print $13}'
rval=$?;;
'Mqueue')
tail -n1 "$stats"|awk '{print $14}'
rval=$?;;
'frozen')
tail -n1 "$stats"|awk '{print $15}'
rval=$?;;
'version')
echo "$zexim4ver"
rm $LOCK
trap - INT TERM EXIT
exit $rval;;
*)
usage
rm $LOCK
trap - INT TERM EXIT
exit $rval;;
esac
}
if [ -s "$stats" ]; then
TIMECACHE=`stat -c"%Z" "$stats"`
else
TIMECACHE=0
fi


TIMENOW=`date '+%s'`
if [[ $# == 1 ]];then
CASE_VALUE=$1
if [ "$(($TIMENOW - $TIMECACHE))" -gt "$CACHETTL" ]; then
create_data
fi
zabbix_answer
if [ "$rval" -ne 0 ]; then
echo "ZBX_NOTSUPPORTED"
fi
rm $LOCK
trap - INT TERM EXIT
exit $rval
else
usage
rm $LOCK
trap - INT TERM EXIT
exit 0
fi

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

#!/bin/bash

# Egor Minko. Synchron LLC. May.2012

zexim4ver="ver 2.1"

rval=0

# MULTIPLE PARSERS PROTECTION

LOCK=/tmp/zexim4.pid

while [ -e "$LOCK" ]; do

PID="`cat $LOCK`"

while [ "`ps h -p $PID -o pid,comm|wc -l`" -gt 0 ]

sleep 0.$[ ( $RANDOM % 10 ) + 1 ]s

done

echo $$ > $LOCK

trap "rm -f $LOCK; exit" INT TERM EXIT

# USAGE

function usage()

{

echo "zexim version: $zexim4ver"

echo "usage:"

echo " $0 deliver -- Delivered Messages"

echo " $0 arrive -- Submited Pakets"

echo " $0 error -- Errors Total for Messages"

echo " $0 defer -- Error status: Defered Messages"

echo " $0 unroute -- Error status: Unroutable address"

echo " $0 local -- Local/Virtual delivery of Messages"

echo " $0 complete -- Finished Packets"

echo " $0 reject -- Rejects Total for Packets"

echo " $0 badrelay -- Reject status: Relay not permited"

echo " $0 Pqueue -- Queue size in Packets"

echo " $0 Mqueue -- Queue size in Messages"

echo " $0 frozen -- Frozen Packets"

echo ""

echo " Packet = letter with many recipients"

echo " Message = A single message for one recipient"

echo ""

}

# GLOBAL INSTRUCTIONS

CACHETTL="58" # sec

main_log=/var/log/exim_mainlog

tmp_log=/tmp/exim_log_pars.txt

stats=/tmp/stats.txt

exim=`which exim`

function create_data()

{

# CREATING STATS FILE

if [ ! -e "$stats" ] ; then touch $stats ; fi

# CREATING TMP FILE

# additional 'sub' in 'awk' used for cutting special chars that breaks next 'sed' parsing. For now: []()

position=`tail -1 $stats |awk '{print $1" "$2" "$3}'`

position_log=`tail -1 $main_log | awk '{sub(/\]/,""); sub(/\[/,""); sub(/\)/,""); sub(/\(/,""); print $1" "$2" "$3}'`

# BUILDING REPORT ONLY IF THERE IS DIFFERENCE BETWEEN LAST LINE IN LOG

if [ "$position" == "$position_log" ]

then

vars="0 0 0 0 0 0 0 0 0"

else

if ! grep -qc "" $stats || ! awk '{sub(/\]/,""); sub(/\[/,""); sub(/\)/,""); sub(/\(/,""); print}' $main_log|grep -qc "$position"

then

awk '{sub(/\]/,""); sub(/\[/,""); sub(/\)/,""); sub(/\(/,""); print}' $main_log $main_log > $tmp_log

else

awk '{sub(/\]/,""); sub(/\[/,""); sub(/\)/,""); sub(/\(/,""); print}' $main_log |sed 1,/"$position"/d | sed /"$position"/d > $tmp_log

vars="`awk '\

BEGIN {deliver=0; arrive=0; error=0; local=0; complete=0; reject=0; badrelay=0; defer=0; unroute=0}\

/[-=]>/ { deliver++ }\

/<=/ {arrive++}\

/ \*\* / {error++}\

/[=][=]/ {defer++}\

/al_delivery/ {local++}\

/Completed/ {complete++}\

/rejected/ {reject++}\

/relay not permitted/ {badrelay++}\

/Unrouteable address/ {unroute++}\

END {print deliver" "arrive" "error" "defer" "local" "complete" "reject" "badrelay" "unroute}' $tmp_log`"

queue_size="`$exim -bpc`"

recipients="`exipick -bpu |awk '$2==""{print $1}'|grep -vE "^$"|wc -l`"

frozen="`exiqgrep -zi|wc -l`"

echo $position_log $vars $queue_size $recipients $frozen >> $stats

}

function zabbix_answer()

{

case $CASE_VALUE in

'deliver')

tail -n1 "$stats"|awk '{print $4}'

rval=$?;;

'arrive')

tail -n1 "$stats"|awk '{print $5}'

rval=$?;;

'error')

tail -n1 "$stats"|awk '{print $6}'

rval=$?;;

'defer')

tail -n1 "$stats"|awk '{print $7}'

rval=$?;;

'local')

tail -n1 "$stats"|awk '{print $8}'

rval=$?;;

'complete')

tail -n1 "$stats"|awk '{print $9}'

rval=$?;;

'reject')

tail -n1 "$stats"|awk '{print $10}'

rval=$?;;

'badrelay')

tail -n1 "$stats"|awk '{print $11}'

rval=$?;;

'unroute')

tail -n1 "$stats"|awk '{print $12}'

rval=$?;;

'Pqueue')

tail -n1 "$stats"|awk '{print $13}'

rval=$?;;

'Mqueue')

tail -n1 "$stats"|awk '{print $14}'

rval=$?;;

'frozen')

tail -n1 "$stats"|awk '{print $15}'

rval=$?;;

'version')

echo "$zexim4ver"

rm $LOCK

trap - INT TERM EXIT

exit $rval;;

usage

rm $LOCK

trap - INT TERM EXIT

exit $rval;;

esac

}

if [ -s "$stats" ]; then

TIMECACHE=`stat -c"%Z" "$stats"`

else

TIMECACHE=0

TIMENOW=`date '+%s'`

if [[ $# == 1 ]];then

CASE_VALUE=$1

if [ "$(($TIMENOW - $TIMECACHE))" -gt "$CACHETTL" ]; then

create_data

zabbix_answer

if [ "$rval" -ne 0 ]; then

echo "ZBX_NOTSUPPORTED"

rm $LOCK

trap - INT TERM EXIT

exit $rval

else

usage

rm $LOCK

trap - INT TERM EXIT

exit 0

# chmod +x /etc/zabbix/scripts/exim4.sh

1	# chmod +x /etc/zabbix/scripts/exim4.sh

В скрипте указываем корректный путь к Exim-лог файлу в переменной main_log По умолчанию стоит

main_log=/var/log/exim_mainlog

1	main_log=/var/log/exim_mainlog

Если утилита exipick не установлена в системе (например, на Cpanel-установках), то скачиваем ее с официального сайта и сохраняем под именем /usr/sbin/exipick

# wget -O /usr/sbin/exipick  http://jetmore.org/john/code/exipick

1	# wget -O /usr/sbin/exipick http://jetmore.org/john/code/exipick

# chmod +x /usr/sbin/exipick

1	# chmod +x /usr/sbin/exipick

Проверяем работу утилиты exipick

# exipick -bpu

1	# exipick -bpu

2.Настройка […]

Опубликовано в рубрике Centos, Debian/Ubuntu, Monitoring, Monitoring

Метки: Exim, monitoring, zabbix

Комментарии отключены

Мониторинг Apache в Zabbix

Июнь 1st, 2016

Evgeniy Kamenev

1.Настройка Apache-статуса на Zabbix-агенте Проверка поддержки модуля

# apache2ctl -M | grep status

1	# apache2ctl -M \| grep status

 status_module (shared)

1	status_module (shared)

Если модуль не активирован,то активируем вручную

# a2enmod status

1	# a2enmod status

Debian/Ubuntu Apache версии 2.4.X

# nano /etc/apache2/mods-enabled/status.conf

1	# nano /etc/apache2/mods-enabled/status.conf

<Location /server-status>
                SetHandler server-status
                Require local
                Require ip <IP _ZABBIX_AGENT> <IP_ZABBIX_SERVER>
        </Location>
        ExtendedStatus On

SetHandler server-status

Require local

Require ip <IP _ZABBIX_AGENT> <IP_ZABBIX_SERVER>

</Location>

ExtendedStatus On

Аpache версии 2.2.X

# nano /etc/apache2/mods-enabled/status.conf

1	# nano /etc/apache2/mods-enabled/status.conf

<Location /server-status>
       SetHandler server-status
       Order Deny,Allow
       Deny from all
       Allow from <IP _ZABBIX_AGENT> <IP_ZABBIX_SERVER>
</Location>
       ExtendedStatus On

SetHandler server-status

Order Deny,Allow

Deny from all

Allow from <IP _ZABBIX_AGENT> <IP_ZABBIX_SERVER>

</Location>

ExtendedStatus On

Проверка синтаксиса и перезапуск Apache-сервера

# apache2ctl configtest && service apache2 reload

1	# apache2ctl configtest && service apache2 reload

2.Настройка скрипта на Zabbix-агенте

# nano /etc/zabbix/scripts/apache-stats.sh

1	# nano /etc/zabbix/scripts/apache-stats.sh

#!/bin/bash
if [[ -z "$1" || -z "$2" || -z "$3" ]]; then
  exit 1
fi
##### PARAMETERS #####
RESERVED="$1"
METRIC="$2"
URL="$3"
STATSURL="${URL}?auto"
#
CACHE_TTL="55"
CACHE_FILE="/tmp/zabbix.apache2.`echo ${URL} | md5sum | cut -d" " -f1`.cache"
EXEC_TIMEOUT="2"
NOW_TIME=`date '+%s'`
##### RUN #####
if [ -s "${CACHE_FILE}" ]; then
  CACHE_TIME=`stat -c"%Y" "${CACHE_FILE}"`
else
  CACHE_TIME=0
fi
DELTA_TIME=$((${NOW_TIME} - ${CACHE_TIME}))
#
if [ ${DELTA_TIME} -lt ${EXEC_TIMEOUT} ]; then
  sleep $((${EXEC_TIMEOUT} - ${DELTA_TIME}))
elif [ ${DELTA_TIME} -gt ${CACHE_TTL} ]; then
  echo "" >> "${CACHE_FILE}" # !!!
  DATACACHE=`curl -sS --insecure --max-time ${EXEC_TIMEOUT} "${STATSURL}" 2>&1`
  echo "${DATACACHE}" > "${CACHE_FILE}" # !!!
  echo "URL=${URL}"  >> "${CACHE_FILE}" # !!!
  chmod 640 "${CACHE_FILE}"
fi
#
if [ "${METRIC}" = "accesses" ]; then
  cat "${CACHE_FILE}" | grep -i "accesses" | cut -d':' -f2 | head -n1
fi
if [ "${METRIC}" = "kbytes" ]; then
  cat "${CACHE_FILE}" | grep -i "kbytes" | cut -d':' -f2 | head -n1
fi
if [ "${METRIC}" = "cpuload" ]; then
  cat "${CACHE_FILE}" | grep -i "cpuload" | cut -d':' -f2 | head -n1
fi
if [ "${METRIC}" = "uptime" ]; then
  cat "${CACHE_FILE}" | grep -i "uptime" | cut -d':' -f2 | head -n1
fi
if [ "${METRIC}" = "avgreq" ]; then
  cat "${CACHE_FILE}" | grep -i "ReqPerSec" | cut -d':' -f2 | head -n1
fi
if [ "${METRIC}" = "avgreqbytes" ]; then
  cat "${CACHE_FILE}" | grep -i "BytesPerReq" | cut -d':' -f2 | head -n1
fi
if [ "${METRIC}" = "avgbytes" ]; then
  cat "${CACHE_FILE}" | grep -i "BytesPerSec" | cut -d':' -f2 | head -n1
fi
if [ "${METRIC}" = "busyworkers" ]; then
  cat "${CACHE_FILE}" | grep -i "BusyWorkers" | cut -d':' -f2 | head -n1
fi
if [ "${METRIC}" = "idleworkers" ]; then
  cat "${CACHE_FILE}" | grep -i "idleworkers" | cut -d':' -f2 | head -n1
fi
if [ "${METRIC}" = "totalslots" ]; then
  cat "${CACHE_FILE}" | grep -i "Scoreboard" | cut -d':' -f2 | sed -e 's/ //g' | wc -c | awk '{print $1-1}'
fi
#
exit 0

#!/bin/bash

if [[ -z "$1" || -z "$2" || -z "$3" ]]; then

exit 1

##### PARAMETERS #####

RESERVED="$1"

METRIC="$2"

URL="$3"

STATSURL="${URL}?auto"

CACHE_TTL="55"

CACHE_FILE="/tmp/zabbix.apache2.`echo ${URL} | md5sum | cut -d" " -f1`.cache"

EXEC_TIMEOUT="2"

NOW_TIME=`date '+%s'`

##### RUN #####

if [ -s "${CACHE_FILE}" ]; then

CACHE_TIME=`stat -c"%Y" "${CACHE_FILE}"`

else

CACHE_TIME=0

DELTA_TIME=$((${NOW_TIME} - ${CACHE_TIME}))

if [ ${DELTA_TIME} -lt ${EXEC_TIMEOUT} ]; then

sleep $((${EXEC_TIMEOUT} - ${DELTA_TIME}))

elif [ ${DELTA_TIME} -gt ${CACHE_TTL} ]; then

echo "" >> "${CACHE_FILE}" # !!!

DATACACHE=`curl -sS --insecure --max-time ${EXEC_TIMEOUT} "${STATSURL}" 2>&1`

echo "${DATACACHE}" > "${CACHE_FILE}" # !!!

echo "URL=${URL}" >> "${CACHE_FILE}" # !!!

chmod 640 "${CACHE_FILE}"

if [ "${METRIC}" = "accesses" ]; then

cat "${CACHE_FILE}" | grep -i "accesses" | cut -d':' -f2 | head -n1

if [ "${METRIC}" = "kbytes" ]; then

cat "${CACHE_FILE}" | grep -i "kbytes" | cut -d':' -f2 | head -n1

if [ "${METRIC}" = "cpuload" ]; then

cat "${CACHE_FILE}" | grep -i "cpuload" | cut -d':' -f2 | head -n1

if [ "${METRIC}" = "uptime" ]; then

cat "${CACHE_FILE}" | grep -i "uptime" | cut -d':' -f2 | head -n1

if [ "${METRIC}" = "avgreq" ]; then

cat "${CACHE_FILE}" | grep -i "ReqPerSec" | cut -d':' -f2 | head -n1

if [ "${METRIC}" = "avgreqbytes" ]; then

cat "${CACHE_FILE}" | grep -i "BytesPerReq" | cut -d':' -f2 | head -n1

if [ "${METRIC}" = "avgbytes" ]; then

cat "${CACHE_FILE}" | grep -i "BytesPerSec" | cut -d':' -f2 | head -n1

if [ "${METRIC}" = "busyworkers" ]; then

cat "${CACHE_FILE}" | grep -i "BusyWorkers" | cut -d':' -f2 | head -n1

if [ "${METRIC}" = "idleworkers" ]; then

cat "${CACHE_FILE}" | grep -i "idleworkers" | cut -d':' -f2 | head -n1

if [ "${METRIC}" = "totalslots" ]; then

cat "${CACHE_FILE}" | grep -i "Scoreboard" | cut -d':' -f2 | sed -e 's/ //g' | wc -c | awk '{print $1-1}'

exit 0

Скрипт предусматривает кеш, что позволяет сократить количество реальных обращений к серверу. Время действия кеша […]

Опубликовано в рубрике Centos, Debian/Ubuntu, Monitoring, Monitoring

Метки: apache, monitoring, zabbix

Комментарии отключены

Архивы за месяц Июнь, 2016

Мониторинг дисков LSI MegaRaid-контроллера средствами megacli

Мониторинг software RAID-массива mdadm в Zabbix

Мониторинг параметров S.M.A.R.T. в Zabbix

Мониторинг LSI MegaRAID в Zabbix

Мониторинг Exim в Zabbix

Мониторинг Apache в Zabbix

Страницы

Свежие записи

Архивы

Рубрики

Админ-панель